Function features of infant incubator:
1. Microprocessor based servo controlled temperature system
2. Temperature displayed by LED
3. Alarm functions of infant incubator:
Power failure;
over temperature;
temperature deviation;
temperature sensor failure;
fan failure;
4. >37°C temperature setting
5. A keypad lock prevent inadvertent changes the infant incubator setting
6. A second thermal cut-off function for more safety
7. Humidity is adjustable in two grade
8. Heating power displayed on infant incubator panel
9. The infant bed inclination angle is adjustable
10. Trough for pulling and pushing ,which is convenient to add water and wash in infant incubator
11. Fan with low noise and long life-span
12. Temperature deviation and over temperature could be amended in infant incubator front panel directly
13. Silence/reset button for alarms
14. six operating windows, two sides access operating windows can be swiveled
15. Support bracket in infant incubator
16. Heater is electrically cut-out if air temperature inside infant incubator exceed 40°C
Standard configuration of infant incubator:
Main body(including the transparent hood, control system, infant bed, water trough), I.V.pole, mattress, support bracket, castors.
Optional parts of infant incubator:
Phototherapy up side unit;
phototherapy from up and down sides;
RS232(485)connector; Tray/pole;
Infant bed pulled from side door;
Infant bed pulled from side and front door;
Double wall hood.
Technical data of infant incubator:
-- Power supply : AC110/220V 60/50Hz
-- Power input : ≤420VA
Optional parts of infant incubator:
-- Environment temperature: 20°C-30°C
-- Environment relative humidity: 30%-75%RH
-- Environment air velocity of flow: <0.3m/s
-- Air Temperature control range:25°C-38°C
-- Temperature fluctuation: +0.5°C
-- Uniformity of mattress temperature: ≤0.8°C
-- Humidity accuracy: ≤10%RH
-- Warm-up time: ≤45min
-- Internal noise level: ≤55dB
-- Infant incubator bed tilt angle : +10º
-- Mattress size: 65cm(L)×37cm(W)
-- Trough capacity: 1200ml
-- Air filter: 0.5um
Package:
Each infant incubator unit is packed in one wooden crate:
-- Size :110×78×86cm
-- N.W.:72Kg G.W.:102Kg
Transport and storage:
Environment Temp:-40°C--+55°C
Environment Relative Humidity: ≤95%
Atmospheric Pressure: 500-1060Hpa
|
|
AI-1 (standard) Infant Incubator Images
|
